Complete 800 series specifications


Complete 800 Series Specifications

Model # IRC806 IRC806HS IRC812
Detector
Detector type Indium Antimonide (InSb)
Spectral response < 1.0µm to 5.3µm
Resolution (pixels) 640 x 512 640 x 512 1280 x 1024
Pixel pitch 20µm 12µm 12µm
Imaging Electronics
Frame rate @ max window size 119 Hz 475 Hz 119 Hz
Integration time < 150 ns to full frame
Dynamic range 14-bits with 13-bit option to increase frame rate at small window sizes
Windowing User defined in 4×1 increments; min width=320, min height=32
Integration type Snapshot, automatic selection of integrate while read or integrate then read
Ultra low latency sync Sync I/O, integration out
Image data Simultaneous Camera Link & Gig-E
Communications Serial over Camera Link & Gig-E
Software control Cross platform GenICam compliant
Performance
NEdT 18mK < 30mK < 30mK
Well capacity (electrons) 7M 2M 2M
Operability 99.8% 99.6% 99.6%
LN2 hold time > 8 hours typical, > 4 hours with optional cold filter wheel
Optics
Camera f/# f/2.3, f/3.0 & f/4.0 standard; custom cold shields available on request
Cold filter 3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request
Lens mount Bayonet for 7, 13, 25, 50, 100 & 50/250 mm lenses; bolt hole pattern for non-standard lenses
Optional filter wheel Motorized four position cold filter wheel; 25.4mm diameter x 1.0mm thick filters
General
Power @ 24 VDC 12 watts
System weight < 7 pounds
Size 3.7″ x 8.1″ x 11.8″
Operating temperature range -40C to +55C (-40°F to +131°F)
Storage temperature range -55C to +80C (-67°F to +176°F)
Environmental rating IP-51
Mounting holes 2x 1/4-20 & 4x #10-24

Download the 800 Series data sheet