QuazIR™ HD+


QuazIR HD+ with 45-450mm continuous zoom lens Download White Paper

QuazIR™ HD+

IRC’s new QuazIR™ HD+ is a true high definition cooled infrared OEM sensor engine and is available in the smallest package produced today. Based on advanced high operating temperature (HOT) infrared focal plane technology, the QuazIR™ HD+ HOT MWIR camera core provides 1280 x 1024 resolution in a package specifically configured for applications where size, weight and power (SWaP) are critical considerations. This new core incorporates the latest MWIR detector technology, and is intended for fixed and mobile surveillance applications requiring both high resolution and excellent thermal sensitivity. With our new HOT MWIR FPA, the QuazIR™ HD+ camera core requires minimal power in a package that weighs about one pound, and is designed for continuous operation in mission critical applications.

View QuazIR™ HD+ Datasheet

Detector QuazIRTM HD+ HOT
Detector type nBn
Spectral range MWIR
Resolution 1280 x 1024 (1.3M Pixel – Windowable)
Pitch 12 μm x 12 μm
Operability > 99.5%
Dynamic range 75 dB
Readout Snapshot
Well capacity 2.0 Me-
Integration time <500 nsec. to 16 msec. adjustable
Dewar / Cooler
Cooler type Stirling
Cold shield f/2.3 or f/4 standard, custom cold shields available
Cold filter MWIR standard, CO2 notch & custom filters optional
Cold shield height 25.4 mm standard, others available
Electronics
Display formats 720p 29.97/30.00 / 59.94/60.00 1080p 29.94/30.00
Digital display video Parallel SMPTE 296M or Serial SMPTE 292M HD-SDI Parallel SMPTE 274M or Serial SMPTE 292M HD-SDI
Analog display video Component RGB or YPbPr
KLV metadata insertion SMPTE 334M, 335M, 336M compatible on serial digital display video
Digital data streaming Camera Link base, parallel CMOS or GigE vision
Video compression H.264 baseline profile via Ethernet
Command and control R-232C, RS-422, Camera Link COM or Ethernet
Synchronization modes Internal/External Sync and Clock
Maximum frame rate – full frame 119 Hz full frame digital data / higher frame rates when sub-windowed
Non-uniformity correction tables Up to 6 available
Bad-pixel replacement Weighted nearest-neighbor average of valid pixels/ up to 5×5 cluster accommodated
Lens-direct technology Native support for motorized continuous zoom and motorized focus lenses
Third party lens controller Support for lens manufacturer controllers (COM/PIO) through camera if not Lens-Direct compatible
Auto-focus Command and continuous autofocus using edge based metric
Image Presentation
Noise reduction filter 5 x 5 pixel Gaussian/OFF-ON
Image enhancement Local area processed dynamic contrast enhancement (LAP-DnCE™)/user adjustable
AGLC Full manual, ROI linear (with manual adjust) or ROI histogram (with manual adjust)
Electronic zoom 1X, 2X or 4X edge preserving
Display color formats Monochrome, false color w/normal or inverted polarity
Color palettes 8 monochrome and false color
Reticle 192×192 (HD720) or 256×256 (HD1080) dot bit mapped/central FOV
Special Features
Calibration Flag Open / Closed (Optional)
Low-level mode operation Integration Time Switch
Optics
Available f/2.3 lenses Fixed focal length 13, 25, 50, 100 mm
Available f/4.0 or f/5.5 Continuous zoom optics available on request
General
Input power +12VDC Nominal
Weight ~2 lbs without optic
Size varies based on configuration
Operating temperature -40° C to +71° C
Storage temperature -54° C to + 85° C

Specifications are subject to change without notice.