IRC912


1280×1024 Indium Antimonide (InSb) MWIR Infrared Camera

IRC_900_product_4580The IRC912 high definition 12 micron infrared camera provides the superior performance of a cooled MWIR sensor at up to 119 frames per second full frame and supports sub windowing for even higher frame rates.  Based on the most advanced infrared focal plane technology available today the IRC912 offers NEdT greater than 99.5% operability, and extremely high uniformity the IRC912 is the perfect choice for the most demanding MWIR imaging applications.

Compare all 900 Series model specifications

View IRC912 MWIR Datasheet

IRC912 Specifications

Detector
Detector type Indium Antimonide (InSb)
Spectral response < 1.0µm to 5.3µm
Resolution (pixels) 1280 x 1024
Pixel pitch 12µm
Imaging Electronics
Frame rate @ max window size 119 Hz
Integration time < 150 ns to full frame
Dynamic range 14-bits with 13-bit option to increase frame rate at small window sizes
Windowing User defined in 4×1 increments; min width=320, min height=32
Integration type Snapshot, automatic selection of integrate while read or integrate then read
Ultra low latency sync Sync I/O, integration out
Image data Simultaneous Camera Link & Gig-E
Communications Serial over Camera Link & Gig-E
Software control Cross platform GenICam compliant
Performance
NEdT < 30mK
Well capacity (electrons) 2M
Operability 99.6%
Optics
Camera f/# f/2.3, f/3.0 & f/4.0 standard; custom cold shields available on request
Cold filter 3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request
Lens mount Bayonet
Optional filter wheel Motorized four position warm filter wheel; 25.4mm diameter x 1.0mm thick filters
General
Power @ 24 VDC 28W
System weight < 7 pounds
Closed cycle cooler Rotary
Size 5.1″ x 5.8″ x 8″
Operating temperature range -40C to +55C (-40°F to +131°F)
Storage temperature range -55C to +80C (-67°F to +176°F)
Environmental rating IP-51
Mounting holes 2x 1/4-20 & 4x #10-24

Specifications are subject to change without notice.