IRC906HS

640×512 Indium Antimonide (InSb) MWIR Infrared Camera

The IRC906HS provides the superior performance of a cooled MWIR sensor in a large format imaging camera.  Based on the most advanced infrared high speed focal plane technology available today, the IRC906HS offers unmatched sensitivity, ultra-low noise, no blooming and no crosstalk.

This camera operates at up to 478 Hz full frame rate and supports sub-windowing and triggering for even faster throughput and synchronization with external events. A Software Developers Kit is also available for users who wish to create their own applications.

IRC906HS Specifications
Detector
Detector type Indium Antimonide (InSb)
Spectral response < 1.0µm to 5.3µm
Resolution (pixels) 640 x 512
Pixel pitch 12µm
Imaging Electronics
Frame rate @ max window size 475 Hz
Integration time < 150 ns to full frame
Dynamic range 14-bits with 13-bit option to increase frame rate at small window sizes
Windowing User defined in 4×1 increments; min width=320, min height=32
Integration type Snapshot, automatic selection of integrate while read or integrate then read
Ultra low latency sync Sync I/O, integration out
Image data Simultaneous Camera Link & Gig-E
Communications Serial over Camera Link & Gig-E
Software control Cross platform GenICam compliant
Performance
NEdT <30mK
Well capacity (electrons) 2M
Operability 99.6%
Optics
Camera f/# f/2.3, f/3.0 & f/4.0 standard; custom cold shields available on request
Cold filter 3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request
Lens mount Bayonet
Optional filter wheel Motorized four position warm filter wheel; 25.4mm diameter x 1.0mm thick filters
General
Power @ 24 VDC 25W
System weight <Â 7 pounds
Closed cycle cooler Rotary
Size 5.1″ x 5.8″ x 8″
Operating temperature range -40C to +55C (-40°F to +131°F)
Storage temperature range -55C to +80C (-67°F to +176°F)
Environmental rating IP-51
Mounting holes 2x 1/4-20 & 4x #10-24
Specifications are subject to change without notice.